*Complies with IEEE 802.11n (draft 2.0), IEEE 802.11g, and IEEE 802.11b standards.
*Provides USB 2.0 connector.
*Adopts MIMO technology for wireless rates of up to 150Mbps
*Adopts CCA technology which automatically avoids channel conflicts using its channel selection feature.
*Quick Secure Setup complies with WPS for worry free wireless security.
*Supports 64/128/152-bit WEP, complies with 128 bit WPA standard (TKIP/AES), supports MIC, IV Expansion.
*MIMO technology with stronger signal penetration strength, wider wireless coverage, providing better performance and stability.
*Simple Configuration and monitoring.
*Supports Windows98/ME 2000/XP/Vista/Win CE 6.0 /7.0
*External Antenna - Replaceable antenna – user can change to higher-gain antenna
WRTN-UHR500A12 eXtended range Wireless N USB Adapter with High-speed Draft N Wireless USB Adapter complies with IEEE 802.11n (Draft 2.0), IEEE 802.11g, and IEEE 802.11b standards.
WRTN-UHR500A12 Wireless USB Adapter includes an easy-to-use configuration that discovers available wireless networks wherever you go. Its auto-sensing capability allows high packet transfer up to 150Mbps for maximum throughput.
WRTN-UHR500A12 adapter employs MIMO technology and has one internal Intelligent Antennas providing even better wireless performance, transmission rates, stability and CCA technology automatically avoids channel coverage. At the same time, conflicts using its channel selection feature.
WRTN-UHR500A12 supports 64/128/152-bit WEP encryptions, as well as WPA/WPA2 and WPA-PSK/WPA2-PSK encryptions and mechanisms in addition to the adapter’s QSS (Quick Secure Setup) feature, allowing users to quickly and easily setup wireless security. It also works well with other 11g and 11n protocol wireless products. It is designed to provide good performance with minimum power consumption and enhance the advantages of robust system and cost effective.
WRTN-UHR500A12 2.0 Interface and UPnP equipped with Detachable antenna allows user to replace higher gain antenna, and its higher output power enables user to build a convenient, efficient, and bigger coverage wireless network.
The WRTN-UHR500A12 Support WAN access mode. Support SoftAP function - allows user to create AP function at your computer , and compatibilities of Win 98,Win2000,WinME, and Win XP operation systems provide more flexibility and mobility to users. For home users and small enterprises. Quick and easy setup with Web-based management utility.
|
Standards and Protocols |
IEEE 802.11n (draft 2.0), IEEE , IEEE 802.11b, CSMA/CA with ACK |
|
Chip-set |
RALINK |
|
Interface Type |
USB 2.0 |
|
Frequency Band |
2.4~2.4835GHz |
|
Transmission Rate |
11n: 270/243/216/162/108/81/54/27Mbps |
|
|
|
|
11b: 11/5.M(adaptive) |
|
|
Channels |
13(ETSI) 11(FCC) |
|
Frequency Expansion |
DSSS (Direct Sequence Spread Spectrum) |
|
Data Modulation |
OFDM/CCK/16-QAM/64-QAM |
|
Sensitivity @PER |
|
|
RF Power |
23-+1 dBm(max) |
|
LED Status |
Status |
|
Exterior Dimensions (L x W x H) |
92 x 26 x |
|
Operable Environments |
Operating Temperature: |
Address : Lane 260, No.7, 15-3 Floor, Wun Hua Second Road , Section 1, Linko District, New Taipei City 244. Taiwan
Tel: +886-2-26085571 Fax: +886-2-26085572 E-Mail: sales@ro-timak.com
Copyright
2013 Ro-Timak Technology Co., Ltd. All rights reserved.