Taiwan Time:
Home
> Wireless
> Wireless Home & Office Products
> Embedded AP/Router Module Board
> Indoor
>
WRTN-AGP2500-A53
WRTN-AGP2500-A53 High Power 5.8GHz 802.11a/b/g Access Point PCBA Module Board with Built-in passive PoE(12VDC/ 1A) on Board.
* Access Point PCBA with built-in high power 802.11a/b/g Radio.
* Atheros integrated System –on-Chip.
* SDRAM: 32Mbytes, Flash: 8Mbytes.
* 12VDC Power Supply. Passive PoE
* Input / Output Common Ground.
* MMCX Connector for RF Interface.
* LEDs: Power, Wireless, Ethernet.
ROSAAK WRTN-AGP2500-A53 High Power 5.8GHz 802.11a/b/g Access Point PCBA is designed for Home /Office as well as Enterprise to have wireless broadband connectivity with high performance AP (Access Point) PCBA built with the field-proven Atheros radio SoC chipset. Which provides large enterprises and SMB environments with an optimal-performance solution for deploying a secure and highly manageable wireless networks.
The WRTN-AGP2500-A53 5.8GHz 802.11a/b/g Access Point PCBA Network solution addresses the market requirements for networks that are highly level the product is built with 8M Byte flash and a Linux 2.6 board support package (BSP). It combined with proprietary PA MMICs, the AP provides the highest power performance of its class and It is designed and built to operate within the temperature range of -30°C to +80°C. On board thermal sensor enables remote monitoring of board temperature. This offering end users secure, seamless roaming beyond traditional WLAN boundaries and provides easy deployment in areas that do not (or cannot) support a wired backhaul.
WRTN-AGP2500-A53 can be powered by a standard 12V DC supply via DC jack, passive PoE(12VDC/ 1A). A powerful web-based user interface configures the device for multiple applications . the AP integrates 802.3af Power Over Ethernet (PoE) function, which allows service providers to quickly and easily install this device in areas where power outlets are not readily available.
Application
* Wide coverage Access Point for wireless clients.
* High power RF output for high availability links.
* Long range links for wired-LAN replacement.
* High throughput for high utilization network links.
* Multiple modes (AP, Multi-Bridge, AP Client, CPE Router, Bridge and Repeater) for flexible design of layer-2 and layer-3 wireless networks.
* Multiple security protocols (WEP, WPA, WPA2, TKIP and AES) for WISP applications.
|
System Information |
|||||
|
Processor |
180 MHz MIPS 4Kc |
||||
|
Flash |
8 MByte |
||||
|
Memory |
32 MByte, 16-bit SDRAM |
||||
|
Kernel |
Linux 2.6.21 |
||||
|
Driver |
Atheros Madwifi |
||||
|
Interface |
Wireless: IEEE 802.11a/b/g |
Ethernet: 1 x 10/100 Base T Port |
|||
|
Push Button Reset |
1. Click button for reset 2. Hold button over 5 sec. for return default |
||||
|
Watch Dog Timer |
Yes |
||||
|
LED Header |
4 Pings Header |
||||
|
Radio Information |
|||||
|
Radio Chip |
AR512 |
||||
|
Operation Mode |
AP, Multi-Bridge, AP Client, CPE Router, Bridge and Repeater |
||||
|
Data Rate |
802.11a/g 108/54/48/36/24/18/12/9/6Mbps 802.11b 11/5.5/2/1Mbps (Data Transfer rates) |
||||
|
Modulation |
BPSK, QPSK, CCK, and OFDM |
||||
|
Channel Bandwidth |
20M, Turbo Mode |
||||
|
Frequency Range |
IEEE802.11a: JAPAN: 5180~5250MHz |
IEEE802.11b/g: USA: 2412~2462 MHz ETSI: 2412~2472 MHz JAPAN: 2412~2483 MHz |
|||
|
Output Power |
IEEE802.11a: |
IEEE802.11b: |
|||
|
Receiver Sensitivity |
IEEE 802.11a/g -78+-1.5dBm@36Mbps -71+-1.5dBm@48Mbps -66+-1.5dBm@54Mbps |
IEEE 802.11b -90+-1.5dBm@1Mbps -80+-1.5dBm@2Mbps |
|||
|
Software Information |
|||||
|
Site Survey |
Yes |
||||
|
Distance Range |
0 to 50000 Meter |
||||
|
Support Band |
IEEE 802.11a/b/g |
||||
|
Wireless Security |
WEP/WPA/WPA2 |
||||
|
802.11e QoS (WMM) |
Yes |
||||
|
Isolate |
Yes |
||||
|
IP Alias |
Yes (Management IP) |
||||
|
Lock BSSID |
Yes (Client/CPE Router/Repeater mode Only) |
||||
|
Bandwidth control |
Yes (Upload or Download Limit) |
||||
|
Firmware Upgrade |
Yes |
||||
|
NTP |
Yes |
||||
|
SNMP |
Yes |
||||
|
MAC Filter |
Yes |
||||
|
Country Code Select |
Yes |
||||
|
Adjust Output Power |
Yes |
||||
|
Antenna Select |
Yes |
||||
|
Power & Environmental Information |
|||||
|
DC Jack Input |
12V@1A (DC Voltage) |
||||
|
PoE |
Passive PoE (12VDC)input |
||||
|
Power Consumption |
6W |
||||
|
Operation Temperature |
-30 to +80°C |
||||
|
Humidity |
95% @ +55°C |
||||
|
Dimension |
70 mm x 90 mm |
||||
High Power 5.8GHz 802.11a Access Point PCBA Module Board with Built-in passive PoE(12VDC/ 1A) on Board.WRTN-AP2500-A53
High-Power 54Mbps Wireless AP PCBA Module with Built-in PoE on Board (1000mW)WRTG-IN01000A64
High-Power 54Mbps Wireless AP PCBA Module with Built-in PoE on Board (400mW) WRTG-IN0400A64
NO. 38, 3rd Floor, Wun Hua First Road , Section 1, Linko Township,Taipei County Taiwan
Tel: +886-2-26085571 Fax: +886-2-26085572 E-Mail: sales@rosaak.com
Copyright 
2010 ROSAAK Technology Co., Ltd. All rights reserved.